Point your dish remote at the device you want to pair it with. Press and hold the button on the dish remote that corresponds to the device you want to program tv, dvd, or aux. Then i held down the dvr and guide button at the same time until it beeped then pressed the back button.
Enter the code and press pound. The tv button should flash 3times. Addressing remote to tv Point your dish remote at the device you want to pair. Enter the remote code if programming in aux mode, you must press the following number before entering the remote code: Point your dish remote at the device you want to pair. Point your dish remote at the device that you want to pair it with.
Program a dish remote to match a specific receiver by changing the remote address through the receiver. Depending on the device that you want to program, press and hold the tv, dvd, or aux button.
Press page up and then pound. Dish network subscribers can enter the tv code for their television into the remote after pressing and holding down the tv button. With the remote pointing at the desired device, press and hold the mode button that you want to program your remote to until all of the mode buttons light up 2.
How to program your dish remote to a tv or another device. Control, indicating it has paired with your dish receiver aux input sat tv 4 press the sat button on the side of the remote control 3 open the front panel of your dish receiver, and press the sys info button sys info 2 replace the back cover Be patient, because you may have to hold it for 10 or more seconds. The mode button will begin to flash. Access the system info screen and menu for the receiver by pressing the system info button on the front panel of the receiver.
If your remote is model Select Settings from the on-screen menu. Select Remote Control from the on-screen menu. Use the on-screen menu to select the device you want to pair. Select the Pairing Wizard option from the menu. Of the choices, the wizard is the easiest because it guides you through the process. Follow the on-screen instructions to test each code. For most devices, this involves pressing either the Volume or Power buttons on the DISH remote to see if anything happens.
If the code works, select Finish on the screen. Test your DISH remote thoroughly. This is especially true if your device has a lot of unique or specialized features. How to program older DISH remote controls. After about 10 seconds, you should see all four Mode buttons light up. When they do, release the button and it will start blinking. The blinking Mode button should now be a solid light. This means the DISH remote is ready to program.
Keep pressing the Up button every few seconds until the device turns off. The Mode button should blink several times. Test your DISH remote. Now you want to test the remote control to make sure everything works as expected. Now just kick back, relax, and enjoy all that great DISH programming. Related articles DISH vs. The system info screen should disappear from your TV—this lets you know the pairing process worked. Press System Info on the receiver.
0コメント